Home > Service > FAQ

Knowledge Base——Toilet

Createdate:2018/08/10

Base on the structure, closestool can divide into:

Split type closestool

Split type closestool’s water tank is separated from pedestal. The water tank is connecting the back of pedestal with some tighten screws. There are some sealing plastic between the pedestal and water tank which can prevent water drops out.

The feature of Split type closestool: water tank is installed in a higher place, the water level is higher, which means the hydraulic pressure is heavier, thus, there is easier to clean the closestool. Because the water tank and pedestal have separated production lines, it cause higher rates of finished products and easier to produce, as a result, the price is cheaper.

Integral closestool

This type of closestool is an integrated one, no separated parts, so it have a good looks. However, it is much more difficult to produce, lower rates of finished products, as a result, it have higher price in the market.

Wall-hang type closestool

There are two types of wall-hang type closestool, wall-hang and on-the-ground. It use the flushing valve instead of water tank, save the time of impounding, is continuous useable and it provide convenience on cleaning. It is concealed water tank with a clean and tidy looks, but it is hard to replace.

 

The unloading system of closestool can divide into:

Wash-down type

Use the impact force of the water flow to flush the closestool. This type of closestool always has a steep side wall, there are limited water inside the urinal. This type of product is main European product structure, the biggest advantage is its water flow is less than other types, however, its noise is bigger. Install is much more elasticity, the requirement of space is loose.

Siphon type

Its structure just like the other siphon type unloading systems, the only difference is that our supply pipe is buried under the urinal and straight down to the bottom. For adapting the requirement of pipe, water tank and urinal are an integrated one. The biggest advantage is that it uses vortex and siphon: vortex can provide strong centripetal force, spin the sewage into the vortex, then discharge them through siphoned power, the whole flushing process is quick and complete and it has less smell and noise.

Siphon-jet type

Siphon-jet type is improved from siphon type. The change is that it add a jet port, which can improve the power of water flow, meanwhile it improved the speed of discharging sewage. The area of water covered is bigger than other type, it has a strict standard of the deep of water, and it is good at reducing the smell and preventing splash out. Furthermore, the jet water flow is working under water so that the noise is limited.

Base on the space between the device and the wall, closestool can divide into:

Ground discharging (S): 200mm

Ground discharging (S): 305mm

Ground discharging (S): 400mm     

Wall discharging turn into Ground discharging (S/P): Flexible space (can discharge through wall or ground).
Innoci Company
About innoci
Video Center
News Center
Product Advantage
Contact innoci
Product Categories
Vanities
Toilets
Basins
Kitchen Sinks
Faucets
Bathtubs
Mirrors
Showers
Accessories
Useful Links
FAQ
Service
Follow innoci