Home > Service > FAQ

How do I choose a toilet

Createdate:2018/08/10

Glaze: A good closestool should have a smooth and shiny glaze with an excellent saturation. It is necessary to check if the sewer is rough or not, a rough sewer may cause sewer block easier.


Quality:A good closestool should be produced in high temperature. During the production of closestool, burning in high temperature can decrease the water absorption which means the closestool does not absorb sewage easily and produce peculiar smell. The closestools in middle and low level quality always have a high water absorption rate which will cause odour and not easy to clean. After a long time of using it, the closestool will have cracks and water leaking.

How to check: knock the closestool by hands and listen to the sound, if the sound is not clear, it might have cracks inside or it lacks of burning during production.


Caliber: The glazing inside will help a smooth performance, the unloading pipe should have a suitable size of caliber with a smooth and shiny glazing. The unloading system should be powerful enough in flushing so as to clean those hanging dirt, and prevent the pipe block effectively.

How to check: Put your hand into the closestool caliber, the size just suits the palm or is bigger than the palm will be the best.


Fittings: Fittings decide the life cycle of a closestool directly. The quality of fittings between good and normal closestool have significant differences. Almost all the closestool users have the experience of broken fittings which cause water pollution, thus, do not forget to check the fittings when purchasing closestool.

How to check: Press the button deeply, if the sound of button is loud and clear, the fittings are the best.


Weight: The heavier the better, a normal closestool is about 25kgs, a good closestool is about 50kgs. Because of the high temperature when producing the good closestool, the closestool is almost full-vitreous, thus, the weight will become heavier.

How to check: Weigh the cover of water tank.


Flushing: A closestool should have the flushing function basically. Wash-down type and siphon wash-down type have an excellent performance of cleaning and washing, but the noise is louder; vortex type have more water consumption, but it is much quiet. We suggest the barrels-siphoned off type, it can clean the closestool rapidly and also can saving water.


Water tank: The main problem of water tank is water leaking. It is hard to judge whether the water tank is leaking or not beside it have water drops obviously.

How to check: Drop some blue ink in to water tank, mix it up with water and check the water outlet, if there are blue water coming out, the water tank is leaking.


Space: The space between the pipe and the wall. It is important to measure the space in order to choose the right size of closestool to suit the space. The unloading pipe under the ground usually has 3 different sizes of space:200mm,300mm or 400mm; (Innoci closestool have a movable bottom which can suit any size of space) if the unloading pipe is on the wall, should consider the height between the pipe and the ground, the height is usually 180mm in the market.

Innoci Company
About innoci
Video Center
News Center
Product Advantage
Contact innoci
Product Categories
Vanities
Toilets
Basins
Kitchen Sinks
Faucets
Bathtubs
Mirrors
Showers
Accessories
Useful Links
FAQ
Service
Follow innoci